Body Waterproof New

Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters

Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters
Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters
Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters
Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters
Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters
Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters
Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters
Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters

Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters    Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters
The Fortune M3 with the PL2943 case with a large 7 × 4 Winstar display is a selective IB metal detector with metal recognition, working on the principle of induction balance. Metal Discrimination - VDI numerical and bar-charting, as for more expensive devices, for example MINELAB, FISHER, XP Metal Detectors, GARRETT (different objects and metal alloys have their own digital value). Discrimination: VDI number (VDI), synograph.

Voice of the target: 90-tone, 4-tone, two-tone. Sensor Balance Care Compensation: Automatic.

Winstar 7 × 4 display. The latest firmware is available. Masks The ability to mask unwanted metal.

Tuning the device to the frequency of the existing sensor. Search Sensor Frequency: 5-20 kHz. Housing PL2943WH (dimensions): 140 × 100 × 30 mm. PL2943WH is a thin instrument waterproof housing made of impact-resistant heat-resistant ABS plastic UL-94V0. Provides protection against dust and moisture according to IP65.

In-depth test of Fortune M3 / Fortune M3 by air. DD 320x300 mm 7 kHz / current 86 mA / frequency spacing 1.8 kHz / sens 6.

5 kopeek of the USSR 1981: 41 cm. 3 kopeek 1910: 37 cm.

On average, the detection range by air = 32-57 cm per coin. Large metal objects up to 150-200 cm. The main parameters of this assembly. 2200 Li-ion battery (real capacity) mAh 3.7V. Collapsible, adjustable rod, the lower part is impact-resistant plastic, the upper part is high-strength aluminum, covered with factory powder paint.

High-quality board, factory-made, double-sided, with a protective mask and plating holes. In a complete set, the unit is powered by 3.7 V (lithium battery 18650 by 2200 mAh). If the power will be made its own, then it is possible from 2 to 12 V. Power connector for 5.5 × 2.1 mm plug.

The pinout of the sensor connector is as follows. Sensor frequency: 7.2 kHz (default). Spacing between TX-RX: 1.7-1.8 kHz. The device is multi-frequency, with it you can use different coils with different frequencies. The control unit in the housing PL2943 with a large display 7 × 4 Winstar.

Photo may differ from the present. But in no case is the functionality affected. Almost the same or the next day. Sometimes the processing time is up to 3 days.

The product is in Ukraine. Thank you for being with us. The item "Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters" is in sale since Wednesday, January 22, 2020. This item is in the category "Business & Industrial\Test, Measurement & Inspection\Test Meters & Detectors\Metal Detectors". The seller is "ua-sap" and is located in Europe. This item can be shipped worldwide.

  • Model: M3
  • Country/Region of Manufacture: Ukraine
  • MPN: Does Not Apply
  • Brand: Fortuna
  • Intended Use: General Purpose
  • Type: Ground Search
  • Features: Discrimination Knob


Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters    Metal detector Fortuna M3 (body PL2943) DD 30x32 cm. Up to 2 meters